小尺度交通信号灯的检测与状态识别

交通信号灯识别包括检测和状态识别，在智能交通系统中发挥重要作用。基于YOLOv3算法提出了一种交通信号灯检测与状态识别模型。针对交通信号灯相较于交通场景中其他目标具有尺度小的特性进行了算法的设计：降低骨干网络的下采样倍率以增加小尺度目标的特征描述能力；通过增大特征图的尺度来改进多尺度特征融合；引入广义交并比作为检测任务的损失函数来改进目标边界框的回归效果。同时，根据交通信号灯本身的特性，使用颜色和形状约束的方法对信号灯进行状态识别和类别验证。最后在公开的Bosch交通信号灯数据集上和实际的城区道路进行了实验验证。实验结果表明，所提出的算法能够提升交通信号灯识别的精度和召回率，识别准确率可以达到90%左右。     

Human action recognition toward massive-scale sport sceneries based on deep multi-model feature fusion

In sport sceneries, automatically recognizing human actions is a useful technique that can be popularly applied in may domains, such as human body tracking and athlete behavior analysis Most state-of-the-art deep architectures have achieved competitive performance in recognizing human action. However, it is still a challenging task due to the unavoidable occlusion, camera angle changes, and varied human posture. In this paper, we propose a novel deep multimodal feature fusion algorithm for human action recognition. The key technique is a multi-model feature fusion scheme. More specifically, we fuse visual feature, skeleton posture, probability maps and audio signal into a hybrid feature, which is utilized to represent human action. Then these feature channels are optimally combined using a deep model, wherein the weights of multiple feature channels can be predicted intelligently. Finally, the optimally fused feature are fed into a multi-class SVM for conducting human action recognition. Extensive comparative results and parameter analysis have shown the effectiveness of our proposed method.     

The control of paracetamol particle size and surface morphology through crystallisation in a spray dryer

The parameters governing the crystallisation of paracetamol using various conventional techniques has been extensively studied, however the factors influencing the drug crystallisation using spray drying is not as well understood. The aim of this work was to investigate the crystallisation of an active pharmaceutical ingredient through evaporative crystallisation using a spray dryer to study the physicochemical properties of the drug and to use semi-empirical equations to gain insight into the morphology and particle size of the dried powder. Paracetamol solutions were spray dried at various inlet temperatures ranging from 60 °C to 120 °C and also from a series of inlet feed solvent compositions ranging from 50/50% v/v ethanol/water to 100% ethanol and solid-state characterisation was done. The size and morphology of the dried materials were altered with a change in spray drying parameters, with an increase in inlet temperature leading to an increase in particle Sauter mean diameter (from 3.0 to 4.4 µm) and a decrease in the particle size with an increase in ethanol concentration in the feed (from 4.6 to 4.4 µm) as a result of changes in particle density and atomised droplet size. The morphology of the dried particles consisted of agglomerates of individual crystallites bound together into larger semi-spherical agglomerates with a higher tendency for particles having crystalline ridges to form at higher ethanol concentrations of the feed.     

Diagnosis of the surface morphology of laser-ablated materials using the weighted- DCT approach in laser speckle interferometry for application to plasma facing materials

To implement on-line, real-time monitoring for the surface morphology of Plasma-Facing Materials (PFMs) in tokamak, we developed a Laser Speckle Interferometry measurement approach. A laser ablation method was used to simulate the erosion process during Plasma-Wall Interactions in a tokamak. In the present investigation, we evaluated the results of laser ablation morphology changes on the surface of Mo material reconstructed by four different approaches (Flood-fill, Quality-guided, Discrete Cosine Transform (DCT) and Weighted-DCT). The morphology results measured by the weighted-DCT approach are very close to the measurement results from confocal microscopy with an average error rate within 7%. It is verified that the weighted-DCT algorithm has high accuracy and can efficiently reduce the influence of noise pollution coming from laser ablation, which is used as a proxy for erosion from plasma wall interaction. Additionally, the CPU computer time has been shortened. This is of great significance for the real-time monitoring of PFMs’ morphology in the Experimental Advanced Superconducting Tokamak (EAST) in the future.     

结合深度学习与支持向量机的金属零件识别

目的 在视觉引导的工业机器人自动拾取研究中，关键技术难点之一是机器人抓取目标区域的识别问题。特别是金属零件，其表面的反光、随意摆放时相互遮挡等非结构化因素都给抓取区域的识别带来巨大的挑战。因此，本文提出一种结合深度学习和支持向量机的抓取区域识别方法。方法 分别提取抓取区域的方向梯度直方图（HOG）和局部二进制模式（LBP）特征，利用主成分分析法（PCA）对融合后的特征进行降维，以此来训练支持向量机（SVM）分类器。通过训练Mask R-CNN（regions with convolutional neural network）神经网络完成抓取区域的初步分割。然后利用SVM对Mask R-CNN识别的抓取区域进行二次分类，完成对干扰区域的剔除。最后计算掩码完成实例分割，以此达到对抓取区域的精确识别。结果 对于随机摆放的铜质金属零件，本文算法与单一的Mask R-CNN及多特征融合的SVM算法就识别准确率、错检率、漏检率3个指标进行了比较，结果表明本文算法在识别准确率上较Mask R-CNN和SVM算法分别提高了7%和25%，同时有效降低了错检率与漏检率。结论 本文算法结合了Mask R-CNN与SVM两种方法，对于反光和遮挡情况具有一定的鲁棒性，同时有效地提升了目标识别的准确率。     

面向多源数据融合的稀疏表示目标跟踪

传统的基于稀疏表示的目标跟踪方法主要利用目标的灰度特征构建稀疏表示模型。由于灰度特征对光照变化敏感，这会影响目标跟踪在复杂场景下的鲁棒性。基于多源数据融合的目标跟踪可以明显提升目标跟踪鲁棒性，但如何有效融合不同维度，不同类型的多源目标特征成为基于多源数据融合的目标跟踪所要解决的关键问题。提出了一个基于目标状态以及灰度特征的稀疏表示目标跟踪方法。所提出的方法可通过基于核函数表示的稀疏表示模型，在探究目标状态以及灰度特征相关性的基础上，将两种不同维度的特征进行有效融合，提升目标跟踪在复杂场景下的鲁棒性。     

Comparison of joint angle,velocity and acceleration estimators for hydraulically actuated manipulators to a novel dynamical approach

Excavators are used for a wide range of applications like earthworks and material handling. Assistance systems are becoming more common to support the operator. For monitoring and control based assistance functions the angular position, velocity and acceleration of the joints from the working implement are required. Commercial systems often use inertial measurement units, consisting of triaxial accelerometers and gyroscopes, to accomplish an estimation of those states. A novel joint angle, velocity and acceleration estimation for hydraulic manipulators is proposed and compared to state of the art methods. A decentralized kinematic filter using no information about the underlying system and a centralized kinematic filter taking the system kinematics into account are implemented as state of the art approaches. Both filters only use inertial measurement units to obtain information about the current state of the system. The novel centralized dynamic filter uses the same information as the centralized kinematic filter and extends it by a dynamic model containing additional information about the angular acceleration due to pressure readings of the hydraulic cylinders. Kalman filtering is used to combine the derived system and measurement models with the sensor information. The methods are evaluated on a material handling excavator for single and coupled movements of the working implement. The novel centralized dynamic filter enables improvements for the angular acceleration estimation compared to the decentralized and centralized kinematic filter. Less noise of the acceleration estimation and a better tracking of the actual acceleration are shown.     

基于聚类的数据加权优化在犯罪预测中的应用

近年来，我国传统暴力犯罪与成年人犯罪呈下降态势，但是，犯罪案由层出不穷。为有效提升公安实践工作中犯罪预测能力，打击各类违法犯罪事件,本文针对犯罪数据，提出一种新型犯罪预测模型。利用密度聚类分析方法将犯罪数据分类，然后进行数据降维提取关键属性生成特征数据，继而对特征数据进行加权优化并采用机器学习的方式对特征数据进行学习，从而预测犯罪案由。实验结果表明，与传统方法相比，本文方法具有更好的预测效果，为公安实践工作中类似案件的侦破和预防，提供新的路径支撑。     

Multicriteria decision-making using Archimedean aggregation operators in Pythagorean hesitant fuzzy environment

In multicriteria decision-making (MCDM), the existing aggregation operators are mostly based on algebraic t-conorm and t-norm. But, Archimedean t-conorms and t-norms are the generalized forms of t-conorms and t-norms which include algebraic, Einstein, Hamacher, Frank, and other types of t-conorms and t-norms. From that view point, in this paper the concepts of Archimedean t-conorm and t-norm are introduced to aggregate Pythagorean hesitant fuzzy information. Some new operational laws for Pythagorean hesitant fuzzy numbers based on Archimedean t-conorm and t-norm have been proposed. Using those operational laws, Archimedean t-conorm and t-norm-based Pythagorean hesitant fuzzy weighted averaging operator and weighted geometric operator are developed. Some of their desirable properties have also been investigated. Afterwards, these operators are applied to solve MCDM problems in Pythagorean hesitant fuzzy environment. The developed Archimedean aggregation operators are also applicable in Pythagorean fuzzy contexts also. To demonstrate the validity, practicality, and effectiveness of the proposed method, a practical problem is considered, solved, and compared with other existing method.